Installing The Wlan Ap 8120 With External Antenna To The Ceiling - Avaya WLAN AP 8120 Vorschriften

10. Verify that the antennas are securely mounted to the wall (or mast, in the case of a
11. Attach the antenna cables to the access point.
12. Make electrical connections.
Installing the WLAN AP 8120 with External Antenna to the
ceiling
The WLAN AP 8120 with External Antenna installs similarly to the WLAN AP 8120. In addition
to installing the access point itself, with the WLAN AP 8120 with External Antenna you must
also mount the adjoining antennas. You can mount the WLAN AP 8120 with External Antenna
on the ceiling using a ceiling grid adaptor.
Plan your installation to allow for the installation of both the access point and the antennas.
Ensure you have the correct length of cable to connect the access point to the antennas. Each
antenna comes with three 3–ft pre-installed permanent cables. If your installation distance is
Avaya WLAN 8100 Regulatory Information - WLAN AP 8120 with External Antenna
Laird antenna installation).
Use the following table to match the 180 degree TYCO antenna and the 70 degree Laird
antenna connectors to the AP8120 - with External Antenna inputs with the cables. The 180
degree TYCO antenna connectors are labeled the same as the AP8120 - with External
Antenna inputs.
Hardware
AP8120- 2.5G #1
with
External
Antenna
inputs/ 180
degree
TYCO
antenna
70 degree V-Pol
Laird
antenna
inputs

Installing the WLAN AP 8120 with External Antenna to the ceiling

Inputs
2.5G #2 2.5G #3 5G #1
H-POL V-POL V-Pol
5G #2 5G #3
H-POL V-POL
October 2011 21