Overview And Operation; Unit Power-On-Reset - Bair Hugger 750 Betriebshandbuch

10

Overview and Operation

Alphanumeric
display
User interface
IV pole clamp
Figure A. Model 750 temperature
management unit – front view

Unit Power-On-Reset

The Model 750 temperature management unit proceeds through the following
power-on-reset sequence after you connect the unit to a grounded power source:
• Performs all self-test functions.
• Illuminates indicator lights and all pixels in the alphanumeric display momentarily.
• Displays the text "BH 750" and the software revision level in the alphanumeric
display.
• Sounds the alarm (three low-level clicks).
• Enters the Standby mode.
If the temperature management unit loses power for less than 1 second, the unit's
software will return the unit to the operating mode you selected prior to the power
loss. However, if the temperature management unit loses power for longer than 1
second, the unit's software will reset when you restore power. The unit will then
enter the Standby mode.
Bair Hugger Model 750 Temperature Management Unit Operator's Manual
Power cord
Carrying handle
retainer
Power cord
IV pole
inlet
stabilizer
Figure B. Model 750 temperature
management unit – rear view
Hose
Labels
Hose outlet