Bair Hugger 750 Betriebshandbuch Seite 16

Bair Hugger Model 750 Temperature Management Unit Operator's Manual
Specifications – Continued
Electrical Characteristics
HEATING ELEMENT
LEAKAGE CURRENT
BLOWER MOTOR
POWER CONSUMPTION
POWER CORD
DEVICE RATINGS
FUSES
CERTIFICATIONS
CLASSIFICATION
DIAGNOSTICS
1400 W Resistive
Meets UL 60601-1 and IEC 60601-1 requirements.
Operating speed: approximately 4,000 rpm
Airflow: up to 48 cfm or 23 L/s
Peak: 1550 W
Average: 800 W
15 ft., SJT, 3 cond., 13 A
15 ft., SJT, 3 cond., 15 A
4.6 m, HAR, 3 cond., 10 A
110-120 VAC, 50/60 Hz, 11.7 A, or
220-240 VAC, 50/60 Hz, 7.2 A, or
100 VAC, 50/60 Hz, 14.5 A
12 A (110 - 120 VAC)
8 A (220 - 240 VAC)
15 A (100 VAC)
IEC 60601-1; EN 60601-1-2; UL 60601-1;
CAN/CSA-C22.2, No. 601.1, EN 55011
Classified under IEC 60601-1 Guidelines
(and other national versions of the Guidelines)
as Class I, Type BF, Ordinary equipment,
Continuous operation. Not suitable for use in
the presence of flammable anesthetic mixtures
with air or with oxygen or nitrous oxide.
Classified by Underwriters Laboratories Inc.
with respect to electric shock, fire, and
mechanical hazards only, in accordance with
UL 60601-1 and in accordance with
Canadian/CSA C22.2, No. 601.1. Classified
under the Medical Device (93/42/EEC) as a
Class IIb device.
A qualified service technician can perform
over-temperature detection system testing,
temperature output testing, operating
temperature calibration, and fault code
troubleshooting.
19