Mounting The Temperature Management Unit To An Iv Pole - Bair Hugger 750 Betriebshandbuch

Bair Hugger Model 750 Temperature Management Unit Operator's Manual
13

Mounting the Temperature Management Unit to an IV Pole

CAUTION
To prevent tipping, clamp the Model 750 temperature management unit to an IV
pole at a height that provides stability. We recommend clamping the unit no higher
than 44 in. (112 cm) from the floor on an IV pole with a minimum 14 in.
(35.6 cm) radius wheelbase. Failure to do so may result in IV pole tipping, catheter
site trauma, and patient injury.
METHOD
To mount the Model 750 temperature management unit to an IV pole, simply turn
the clamp handle clockwise to tighten the clamp on the IV pole and counterclock-
wise to release it. See Figure D.
IV pole clamp handle
Figure D.