mothercare ny Choice Gebrauchsanleitung Seite 9

4
fig 0
changing the pram to seat unit
WARNINg! Never change the seat unit from pram position back to seat position with
your child in the seat unit.
fig 1
fig 
16
my3 & my4 chassis languages D0.116-17 16-17
in use
Reattach the hood to the chassis frame.
Attach the apron using touch fasteners
at the top end of the apron to the patches
on the inside edges of the hood.
Remove the pram liner and re-attach the
clasps at the foot section.
Clip all four buckles of the harness back
together, then replace the bumper bar
and hood. Recline the seat as required.
4
fig 
attaching the infant carrier
fig 4
fig 5
fig 6
in use
Squeeze the clasp as shown and recline
the seat as required.
Apply the brake.
Remove the seat unit from the chassis.
Adjust the adaptors on the chassis frame.
push each adaptor inwards then backwards
into its new position, ensure that the indicators
on the adaptors line up with the infant carrier
image. Compatible infant carrier is the Maxi-
Cosi Cabriofix.
1
26/9/08 17:59:00