Non-Functionality - Lervia KH 4406 Bedienungsanleitung

Warning!
The cutters in the appliance are very sharp!
Risk of injury!
• Empty the waste container
latest when shredded material is visible in the
r
viewing window
• Clean the roller container
q
and the waste receptacle
moistened cloth and, if required, with a mild
detergent.
• Remove possible residues in the cutter opening
with a suitable object. Ensure that the appliance
is unplugged before commencing this!

Non-functionality

If the material to be shredded jams:
This means that you have attempted to feed too
much material into the appliance (max. 15 sheets
2
80g/m paper, max. 1 credit card, max. 1 CD/DVD).
• Press and hold the switch
the items to be shredded become jammed.
The appliance now goes into reverse and the
material to be shredded is returned.
w
• Release the switch
be shredded are ejected.
If the appliance suddenly ceases operation:
This means that the appliance is overheated and the
automatic safety cut-out has activated itself. The red
LED glows.
Warning:
Unplug the power plug from the socket. There is a
real danger of overheating. This would lead to irre-
parable damage to the appliance!
• Allow the appliance to cool down.
t
regularly. At the
of the waste receptacle
u
, the cutter attachment
t
with a lightly
w
in position should
as soon as the items to
• Replace the power plug into the socket.
• Switch the appliance on, in that the switch
placed in the position
If the appliance doesn`t allow itself to be
switched on:
t
. • Check that the plug is correctly connected to a
wall socket.
• Try out a different wall socket.
• The appliance is probably defective. Have the
appliance checked by qualified specialists.
e
When the appliance is switched on, however,
the shredding process will not start:
The waste receptacle
• Position the waste receptacle
The appliance has overheated and triggered the
automatic safety switch-off. The red LED glows when
you try to insert material for shredding into the cutter
e
opening .
Warning:
Unplug the power plug from the socket. There is a
real danger of overheating. This would lead to irre-
parable damage to the appliance!
• Allow the appliance to cool down.
• Replace the power plug into the wall socket.
• Switch the appliance on, in that the switch
placed in the position
The cutter attachment
• Place the cutting attachment
position.
- 17 -
.
t
is not properly positioned.
t
correctly.
.
q
is not correctly placed.
q
in the correct
w
is
w
is