involight SlimPAR412 PRO Bedienungsanleitung Seite 22

AUTOMATIC CONTROL:
Press the "Menu" button repeatedly until the display shows
program. Press "Enter" again to select
now set the desired automatic program.
MUSIC CONTROL:
"Sound"
Press "Menu" until
"SO-1"
program
program
PROCEDURE OF THE PROGRAM:
Press the "Menu" button until
again to select the speed
desired speed of the program.
MICROPHONE SENSIVITY:
The sensitivity with which the headlamp reacts to the music signals (bass impulses). Press the "Menu" button until
"Sens".
the display shows
microphone sensitivity
desired microphone sensitivity. The height is the value, the more sensitive the microphone reacts to the music
signals (bass impulses) in the environment
SILENT-MODE:
The Silent mode refers to the music-controlled operation and is also known as Intelligent Sound Control. If the
silent mode is activated "ON" and the microphone of the device does not receive any music signals (bass
impulses), the light beams of the device switch off (BLACKOUT). If the silent mode is deactivated "OFF", the
current program of the device will continue slowly, even if no further music signals (bass impulses) are received.
"SILE"
Press "Menu" until
Press "Enter" again to select
silent mode "ON" or deactivate "OFF".
IRC-CONTROLLING:
Press the "Menu" key until the display shows
"ON"
again to select
control "ON" or deactivate "OFF".
DMX-MODE:
To select the DMX mode and set the start address, press
appears. Press "Enter" again to select
"d1"
address to
address.
MASTER/SLAVE-OPERATION:
The "SlimPAR412 PRO" can be linked to other devices. To set a device as a „Slave", press the „Menu" button
until the display shows
device. The interconnected devices are now working synchronously.
"AU-1"
is displayed. Sound mode is activated. Press "Enter" again to select sound
"SO-3".
to With the "Up" and "Down" buttons you can now set the desired sound
"SPED"
appears on the display. The flow rate menu is displayed. Press "Enter"
"SP-1" "SP-9"
to
The microphone sensitivity menu is displayed. Press "Enter" again to select the
"SE-1" "SE-9".
to
is displayed. The menu for silent mode is displayed.
"ON" "OFF".
or
"INFR".
"OFF".
or With the "Up" and "Down" buttons you can now activate the IR remote
"4CH"
"d512".
With the "Up" and "Down" buttons, you can now set the desired start
„ Slav"
. Confirm with the „Enter" key. Select the desired program on the master
"Auto".
"AU-3"
to . With the "Up" and "Down" buttons, you can
. With the "Up" and "Down" buttons you can now set the
With the "Up" and "Down" buttons, you can now set the
With the "Up" and "Down" buttons you can now activate the
The IR remote control menu is displayed. Press "Enter"
"Menu"
"10CH"
or mode. Press "Setup" again to select DMX start
21
Now the unit plays the automatic
"ADDR"
button until the display