Accessories / Spare Parts - Sundstrom SR 900 Gebrauchsanleitung

4. Valve seat
5. Exhalation membrane
6. Protective cap
7. Gasket
8. Filter holder
9. Gas filter
10. Particle lfilter
11.Pre-filter, SR221
12.Pre-filter holder
2.3 Filter
You can identify the filter type by the colour
code on the filter. See the User instructions
for filters. Note that a particle filter provides
protection only against particles and a gas
filter provides protection only against gases/
vapours. A combined filter protects against
both gases/vapours and particles.
Item
• Particle filter P3 R, SR 510
• Gas filter A1, SR 217
• Gas filter A2, SR 218
• Gas filter AX, SR 298
• Gas filter ABE1, SR 315
• Gas filter ABE2, SR 294
• Gas filter K1, SR 316
• Gas filter K2, SR 295
• Gas filter ABEK1, SR 297
• Combined filter
ABEK1-Hg-P3 R, SR 299-2

2.4 Accessories / Spare parts

Item
• Membrane kit SR 369, fig. 4
Inhalation membrane 1x
Exhalation membranes 2x
Protective caps 2x
• Service kit, fig. 5
Head harness, single strap
Membrane kit SR 369
Pre-filter holder
• Protective hood SR 64, fig. 6 H09-0301
• Protective hood SR 345, fig. 7 H09-1012
• Protective hood SR 346, fig. 8 H09-1112
• Storage box SR 230, fig. 9
• Storage bag SR 339, fig. 10
• Hose SR 951, fig. 11
• Twin hose SR 952, fig. 12
• Voice amplifier SR 324, fig. 13 T01-1217
• Test adapter SR 328, fig. 14
• Steel net disc, fig. 15
• ID-tag, fig. 16
26
-
-
-
R01-3004
R01-3003
-
-
H02-0312
R01-0605
Ordering. No.
H02-1312
H02-2512
H02-2012
H02-2412
H02-3212
H02-3312
H02-4212
H02-4312
H02-5312
H02-6512
Ordering. No.
R01-2004
R01-3005
H09-3012
H09-0112
T01-3003
R01-3009
T01-1202
T01-2001
R09-0101
• Storage bag, 50x, fig. 17
• Cleaning tissues SR 5226,
box of 50, fig. 18
Compressed air attachment SR 307/SR 507
When the half mask is used with compressed air
attachment SR 307/SR 507 the user instructions
for the relevant equipment must be followed.
Fan unit SR 500/SR 700
When the half mask is used with fan unit SR
500/SR 700 the user instructions for the relevant
equipment must be followed.
Remote filter holder SR 905
When the half mask is used with remote filter
holder SR 905 the user instructions for the
relevant equipment must be followed.
3. Use
3.1 Installation
Fasten ID-tag
Fig. 2.
1. Fold flap away before writing your name.
2. Seal the entry field.
3. Insert the label half-way in the slot.
4. Remove the protective paper.
5. Stick the label together.
Fit the filter in the mask
• Check that you have selected the correct filter.
See the User instructions for filters.
• Check that the use-by date has not been
passed. The use-by date is valid provided
that the filter packaging is unopened.
• Fit the filter in the mask so that the arrows on
the filter point towards the user's face. Fig. 19.
• Check that the edge of the filter is sealed by
the filter holder all around and that the filter
is in the internal groove of the filter holder all
around. Fig. 20, 21.
• Fit the pre-filter in the pre-filter holder and
press it into place on the filter. Fig. 22, 23.
When using both gas filter and particle filter,
the particle filter shall always be snapped onto
the gas filter and the gas filter shall always be
inserted in the mask. Press the filters together
with your fingers placed around the outer edges
of the filters until you hear a click. Fig. 24.
R01-0607
H09-0401