Panasonic CZ-CAPRA1 Installationsanleitung Seite 24

2
Remove the top case.
(Case-fixing screws: 2)
3
Mount the bottom case to the wall.
4
Connect the RAC connection
wiring (supplied).
• Arrange the wires
along the groove.
5
Connect the inter-unit
control wiring
(shield wiring).
• Arrange the wires
along the groove.
Functional ground (FG)
Pass
through
the hole.
Clamper (supplied)
6
Only when connecting external equipment
Connect the external I/O wiring.
(P.25)
• Cut here with a nipper
and remove the burr
with a file.
• As shown in step 4 or 5, pass
the clamper (supplied) through
the hole, and fix the wiring.
z When the settings are complete (P.26),
attach the top case.
24
(EN)
Clamper
(supplied)
Pass
through
the hole.
Top case
Case-fixing screws
Top case
Bottom case
Wall to which the
controller is fixed
Screw (supplied)