Herunterladen Inhalt Inhalt Diese Seite drucken

Inhaltsverzeichnis; Supplied Accessories; Installation Precautions; Installation Location - Panasonic CZ-CAPRA1 Installationsanleitung

Rac interface adaptor
Vorschau ausblenden Andere Handbücher für CZ-CAPRA1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 41
CONTENTS
z Safety Precautions .....................2
z About This Adaptor ..................20
z Specifications ...........................21
z Supplied accessories ...............21
z Dimensions ...............................21
Specifications
Model No.

Dimensions

(H × W × D)
Weight
Temperature/
Humidity range
Power Source

Supplied accessories

RAC connection
wiring (1)
5P White
4P Red
Length: 1.9 m
Clamper (3)
*Wirings other than the RAC connection wiring are not included (field supplied item).
*When outputting the operation status or alarm status, a 12 V DC external power source
for relays is required (field supplied item).

Installation Precautions

„ Installation Location
z Avoid the following locations for installation.
• Location where the controller will be splashed with water or affected by dampness
or humidity • Under direct sunlight • Location near heat source • Uneven surface
• Location that is subject to excessive vibration or physical impacts. (Fixing screws
may come off, and the controller may drop.
z Install the controller away from any sources of electrical noise.
z Install the controller at a location with suitable temperature and humidity for
using.
CZ-CAPRA1
120 x 70 x 32.5 (mm)
130 g
0 ˚C to 40 ˚C /
20 % to 80 % (no condensation)
*Indoor use only.
DC12 V
(supplied with room air conditioner)
Screw (4)
Installation
Instructions (1)
z Basic Wiring Diagram ..............22
z Mounting and Wiring ................23
z Setup .........................................26
Dimensions
M3.8 x 16
)
70
32.5
(mm)
35
(EN)
21

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis