LevelOne FBR-1461 Kurzinstallationsanleitung Seite 4

Rear Ports
Power
Port
POWER
1
2 RESET
LAN
3
ADSL
4
Reset
Connect the supplied power adapter to this jack.
After the device is powered on, press it to reset the device or restore
to factory default settings.
0-3 seconds: reset the device
6 seconds above: restore to factory default settings (this is used
when you can not login to the router, e.g. forgot the password)
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to the LAN ports
when connecting to a PC or an office/home network of 10Mbps or
100Mbps.
Connect the supplied RJ-11 ("telephone") cable to this port when
connecting to the ADSL/telephone network.
LAN
Meaning
2
ADSL