WISEUP SHOP WIFI04S Bedienungsanleitung Seite 6

Check if the WAN mode or remote view setup works!
1. Back to the WIFI or WLAN setting page on your phone or mobile device, exit your phone or
mobile device from the current WIFI network, enroll your phone or mobile device in another
WIFI hotspot, or you can turn off the WIFI or WLAN function, enable your mobile network data
instead.
2. Launch the "Plug & Play" or "P2PCamviewer" APP again.
3. Tap "WAN" or "My Cameras" at the bottom of the screen. Tap the code icon to scan the QR
code at the back of the camera directly. For Android devices, the camera will pop up in a few
seconds. For IOS devices, the camera UID and password will fill in the blanks and then tap
"Login" to log in the camera. If the camera shows "Online", the blue indicator light will turn off
while the red one will remain solid, it means the remote view setup is complete and the camera
has entered into WAN mode. You can go ahead to view live or recorded video remotely.