WISEUP SHOP WIFI04S Bedienungsanleitung Seite 5

4.3. WAN Mode or Remote View Setup
>> Please make sure the camera is successfully added to the APP in P2P (LAN) mode and it's
online before you start.
For Android:
Step 1: Launch the "Plug & Play" APP. Tap the arrow icon on the "LAN" page and then go
to "Wi-Fi" page.
Step 2: Turn on "Use wifi" on the "Wi-Fi" page.
Step 3: Tap to search for available networks in the area then select your desired WIFI hotspot
to enroll the camera in.
Step 4: Tap "OK" to complete the remote view setup and the camera will reboot automatically.
Step 5: Exit the "Plug & Play" APP.
For IOS:
Step 1: Launch the "P2PCamViewer" APP. Tap the gear icon on the "Local cameras" page
and then go to "Wireless settings" page.
Step 2: Turn on "WiFi" function. Tap the exclamation mark to search for available networks
in the area then select your desired WIFI hotspot to enroll the camera in.
Step 3: Tap "Done" to complete the remote view setup and the camera will reboot automatical-
ly.
Step 4: Exit the "P2PCamViewer" APP.