Network Setup - WISEUP SHOP WIFI04S Bedienungsanleitung

already and is securely fitted into the camera's SD card slot, or it will not work. We recommend
that you use a SDHC Class 10 Micro SD card.
3.2. Slide the Power Switch to the ON position. When the blue indicator light goes out and the
red one remains solid, it means the camera's WIFI signal is ready.
3.3. If you need the camera to work 7/24 hours, connect it to an outlet AC power supply using
the USB cable and DC 5V power adapter included. Once the camera is connected to outlet AC
power supply, the red and yellow indicator lights will come on and remain solid whether the
Power Switch lies at the ON position or not.
IV. Network Setup
4.1. Install Plug & Play or P2PCamViewer APP on Smartphone or Tablet PC
Go to your App store or Google Play, search for "9527" and then install "Plug & Play" on your
Android phone or tablet PC, or "P2PCamViewer" on your iPhone or iPad.
4.2. LAN Mode or P2P Setup
4.2.1. Go to the WIFI or WLAN setting page on your phone or mobile device, connect to the
camera's WIFI signal named "F06887". The WIFI signal password is "44413". Wait for the WIFI
to be connected.