Frequently Asked Questions - WISEUP SHOP WIFI04S Bedienungsanleitung

onds.
X. Charging
10.1. Connect the camera to an outlet AC power supply using the power adapter and USB
cable included.
10.2. It will take 1 hour to obtain a full charge.
10.3. The camera can record video up to 1 hour on a single charge.

Frequently Asked Questions

Q1: Why Camera WIFI signal is not appearing on my WIFI page?
A1: There are 4 solutions to this question:
1. Reset the camera (See VIII).
2. Keep your phone or mobile device within the camera's WIFI hotspot range, refreshing the
WIFI signal page. It may take up to 2 minutes for the hotspot to become recognizable on your
phone or mobile device's WIFI setting page.
3. Shut off your phone or mobile device's WIFI function for a while, then turn it on to search
again.
4. The camera is in low battery, connect it to an outlet AC power supply using the USB cable
and power adapter included.
Q2: Why does the camera show offline right after I login it on the "WAN" or "My camer-
as" page?
A2: The remote view setup or WAN mode takes 1-3 minutes to complete. Please wait a while.
If the camera still shows offline, check if the camera has been enrolled in a good WIFI network
successfully. Plus, the WIFI network the camera is configured with can't be the same with one
you connect your phone to.
Q3: How do I share my camera with family members?
A3: First, please make sure your camera is in WAN mode already and your family members
have installed the "Plug & Play" or "P2PCamViewer" on their phones or mobile devices.
Second, input the camera UID (a unique combination of numbers and letters specific to your
camera) or the QR code that sticks on the body of the DV camera. Finally, tap "Login" to add
the camera to the APP.
Q4: How many cameras can I add to the existing application?
A4: No limit.