WISEUP SHOP WIFI04S Bedienungsanleitung Seite 10

VI. Motion Detection Recording Setup
>> Please make sure the camera is successfully added to the APP and it's online before you
start.
6.1. Launch the "Plug & Play" or "P2PCamviewer" APP.
6.2. Set up motion detection recording function.
For Android:
Step 1: Tap the arrow icon on the "WAN" or "LAN" page and then select "Alarm settings".
Step 2: On the "Alarm settings" page, you can enable "Motion detection", "PIR" and "Sdcard
Record.
Step 3: Tap "OK" to confirm the motion detection recording setting.
For IOS:
Step 1: Tap the gear icon on the "WAN" or "LAN" page and then select "Alarm settings".
Step 2: Go to "Alarm settings" page, there, you can enable "Motion detection" and "SD-Card
Alarm Record. And you get to choose alarm sensitivity level.
Step 3: Tap "Done" to confirm the motion detection recording setting.