Palazzetti ECOPALEX Glass Installations, Bedienungs Und Wartungsanleitungen Seite 30

5.5 AIR DUCT
with the optional "680" fan and metal pipes for distributing
the air as follows:
per pipe
a double duct; 6 m on just the one duct.
Arranging the appliance
Remove the top plugs, the front diaphragm and the
Secure the upper collars with self-tapping screws
Air distribution in counter hood:
Before recessing the appliance the following has to be
done:
drill the walls and existing hood to allow passage
2 m each side.
and the beam is at least 10 cm, the air outlet collars
if the space between the upper part of the appliance
it will be necessary to make a hole about 30 x 40 cm
2.00 m from the ground to prevent hot air hitting people.
if you wish to lay the fans' power cable outside the
power cable comes through.
30
- 5.8 -
- 5.9 -
- 5.10 -