Other Functions - Sherwood RX-4109 Bedienungsanleitung

OTHER FUNCTIONS

Operating the sleep timer
Setting the Auto Power Control
Adjusting the brightness of the fluorescent displays
• The sleep timer allows the system to continue
to operate for a specified period of time before
automatically shutting off.
• To set the receiver to automatically turn off after
the specified period of time.
• Each time this button is pressed, the sleep time
changes as follows:
10 20 30
Unit: minutes
• While operating the sleep timer, "
• When the sleep time is selected, all display
panels of Sherwood components are dimly lit.
• Press and hold the SLEEP button for more
than 3 seconds to set the time for the main unit
to be automatically turned off when any other
operation is not inputted.
• Each time this button is pressed, the auto power
control time changes as follows:
• The default setting value is 6H.
• Each time this button is pressed, the brightness
of all fluorescent displays of Sherwood
components changes together as follows:
ON Dimmer1
• In the display OFF mode, pressing any button
will restore the display ON mode.
21
60 90 OFF
" lights up.
Dimmer2 OFF