Sherwood RX-4109 Bedienungsanleitung Seite 15

Presetting radio stations
• You can store up to 30 preferred stations in the memory.
1.
Tune in the desired station with auto or manual tuning.
2.
Press the MEMORY button.
or
3.
Select the desired preset number (1~30) and press the MEMORY button.
or
4.
Repeat the above steps 1 to 3 to memorize other stations.
▄ MEMORY BACKUP FUNCTION
The following items, set before the receiver is turned off, are memorized.
• INPUT SELECTOR settings
• Preset stations, etc.
▄
Note
• If the electricity fails or the AC input cord is disconnected for more than several days, they are all cleared.
So you should memorize them again.
• "MEM" is flickering for 5 seconds.
• When using the NUMERIC buttons on the
remote control.
Examples)
For "3"
For "15"
For "30"
• The station has now been stored in the memory.
• When using the NUMERIC buttons, the station
is stored automatically without pressing the
MEMORY button.
• A stored frequency is erased from the memory
by storing another frequency in its place.
• If "MEM" goes off, start again from the above
step 2.
15
within 2 seconds