Mitsubishi Electric PAR-21MAA Installationshandbuch Seite 5

[Function selection flowchart]
[1] Stop the air conditioner to start remote controller function selection mode. → [2] Select from item1. → [3] Select from item2. → [4] Make the setting.
(Details are specified in item3) → [5] Setting completed. → [6] Change the display to the normal one. (End)
Normal display (Display when
the air condition is not running)
(Hold down the E button and press the D button for two
seconds.)
* The display cannot be changed during the unit function
selection, the test run and the self diagnosis.
Item 1
Press the G button.
Change Language
("CHANGE LANGUAGE")
Press the
→
E button.
Function limit
("FUNCTION
Press the
SELECTION")
G button.
Press the Press the
E button. E button.
Press the
G button.
Mode selection
("MODE
SELECTION")
Press the
E button.
→
Press the
Display change G button.
("DISP MODE
SETTING")
[Detailed setting]
[4] -1. CHANGE LANGUAGE setting
The language that appears on the dot display can be selected.
• Press the [ MENU] button to change the language.
1 Japanese (JP), 2 English (GB), 3 German (D), 4 Spanish (E),
5 Russian (RU), 6 Italian (I), 7 Chinese (CH), 8 French (F)
[4] -2. Function limit
(1) Operation function limit setting (operation lock)
• To switch the setting, press the [
1 no1 : Operation lock setting is made on all buttons other than
the [ ON/OFF] button.
2 no2 : Operation lock setting is made on all buttons.
3 OFF (Initial setting value): Operation lock setting is not made.
* To make the operation lock setting valid on the normal screen, it is
necessary to press buttons (Press and hold down the [FILTER]
and [ ON/OFF] buttons at the same time for two seconds.) on
the normal screen after the above setting is made.
(2) Use of automatic mode setting
When the remote controller is connected to the unit that has auto-
matic operation mode, the following settings can be made.
• To switch the setting, press the [
1 ON (Initial setting value) : The automatic mode is displayed when
the operation mode is selected.
2 OFF
: The automatic mode is not displayed
when the operation mode is selected.
(3) Temperature range limit setting
After this setting is made, the temperature can be changed within
the set range.
• To switch the setting, press the [
1 LIMIT TEMP COOL MODE :
The temperature range can be changed on cooling/dry mode.
2 LIMIT TEMP HEAT MODE :
The temperature range can be changed on heating mode.
3 LIMIT TEMP AUTO MODE :
The temperature range can be changed on automatic mode.
4 OFF (initial setting) :The temperature range limit is not active.
* When the setting, other than OFF, is made, the temperature range
limit setting on cooling, heating and automatic mode is made at
the same time. However, the range cannot be limited when the set
temperature range has not changed.
Remote Controller Function
Selection Mode
Item 2
Operation function limit setting ("LOCKING FUNCTION")
Use of automatic mode setting ("SELECT AUTO MODE")
Temperature range limit setting ("LIMIT TEMP FUNCTION")
Use of automatic filter elevation panel up/down operation mode setting
[ ]
Use of fixed airflow direction mode setting
[ ]
→ Remote controller main/sub setting ("CONTROLLER MAIN/SUB")
Use of clock setting ("CLOCK")
Timer function setting ("WEEKLY TIMER")
Contact number setting for error situation ("CALL.")
Temperature display °C/°F setting ("TEMP MODE °C/°F")
Suction air temperature display setting ("ROOM TEMP DISP SELECT")
Automatic cooling/heating display setting ("AUTO MODE DISP C/H")
ON/OFF] button.
ON/OFF] button.
ON/OFF] button.
(Hold down the E button and press
the D button for two seconds.)
* The remote controller records the
setting that is made in this way.
Press the
Press the G button.
D button.
Press the
D button.
Press the G button.
Press the
D button.
Press the G button.
• To increase or decrease the temperature, press the [
ton.
• To switch the upper limit setting and the lower limit setting, press the [
button. The selected setting will flash and the temperature can be set.
• Settable range
Cooling/Dry mode : Lower limit: 19°C ~ 30°C
Heating mode :
Automatic mode :
* The settable range varies depending on the unit to connect (Mr. Slim units,
Free-plan units, and intermediate temperature units)
(4) Use of automatic filter elevation panel up/down operation mode setting
• To switch the setting, press the [
1 ON : The operation to switch to the automatic filter elevation panel up/down
operation mode is valid.
2 OFF: The operation to switch to the automatic filter elevation panel up/down
operation mode is always invalid.
* Switching operation: Press the filter button and the ventilation button together for
2 seconds while the display of stopped unit appears on the remote controller.
• For details of the automatic filter elevation panel up/down operation mode
settings, refer to the installation manual for the indoor unit.
With the automatic filter elevation panel up/down operation mode, the elevat-
ing operation of the panel (grill) on the indoor unit can be made.
(5) Use of fixed airflow direction mode setting
1 ON : The operation to switch to the fixed airflow direction mode is valid.
2 OFF: The operation to switch to the fixed airflow direction mode is always
invalid.
* Switching operation: Press the filter button and the Fan Speed button together
for 2 seconds while the display of stopped unit appears on the remote control-
ler.
• For details of the fixed airflow direction mode settings, refer to the installation
manual for the indoor unit.
With the fixed airflow direction mode settings, the position of the vane can be
fixed for each air outlet.
[4] -3. Mode selection setting
(1) Remote controller main/sub setting
• To switch the setting, press the [
1 Main : The controller will be the main controller.
2 Sub : The controller will be the sub controller.
NOTE
Timer operation stops when the display
for remote controller function selection is
changed to the normal one.
See [4]-1 Dot display
Item 3
The language that is selected in
(Setting content)
CHANGE LANGUAGE mode
appears on this display. English
See [4]-2. (1)
is set in this manual.
See [4]-2. (2)
See [4]-2. (3)
See [4]-2. (4)
F
See [4]-2. (5)
MENU
E
BACK MONITOR/SET
PAR-21MAA
G
See [4]-3. (1)
See [4]-3. (2)
See [4]-3. (3)
See [4]-3. (4)
See [4]-4. (1)
See [4]-4. (2)
See [4]-4. (3)
Upper limit: 30°C ~ 19°C
Lower limit: 17°C ~ 28°C Upper limit: 28°C ~ 17°C
Lower limit: 19°C ~ 28°C Upper limit: 28°C ~ 19°C
ON/OFF] button.
ON/OFF] button.
TEMP. ON/OFF
I
A
ON/OFF FILTER
DAY CHECK TEST
B
CLOCK OPERATION CLEAR
H
C D
TEMP ( ) or ( )] but-
]
5