Kärcher CS 330 Bp Originalbetriebsanleitung Seite 34

NOTICE
Only work at a 30 degree angle. At an angle
of more than 30 degree, the chain becomes
too sharp and wears faster. At an angle of
less than 30 degree the chain remains dull.
NOTICE
Filing gauges and saw chain files are avail-
able in specialist shops.
NOTICE
Upon placement, ensure that the running
surface of the sawteeth is correctly placed
in the guide bar.
NOTICE
If the saw chain was applied opposite to the
rotation direction, turn the guide bar
around. A drilled hole for the drive pin is
present at the top and bottom.