Restart After Storage; Troubleshooting; Specifications - Texas A/S Pro Air 100 Bedienungsanleitung

Restart After Storage

1. Remove spark plug.
2. Pull the starter cord a few times, the piston will expel surplus oil.
3. Clean the spark plug or fit a new one.
4. Refill with fuel (gasoline mixed with 2-stroke oil).

Troubleshooting

Problem
Engine will not run or start
Engine starts but will only
run on low power
Engine hesitates
No engine power under load
Engine runs irregularly
Engine smoking heavily

Specifications

Model
Engine
Max wind speed
Engine rpm
Fuel capacity
Weight
Noise level
Vibration level
Cause
Wrong start procedure
Wrong carburettor setting
Dirty spark plug
Blocked fuel filter
Wrong choke position
Dirty air filter
Wrong choke setting
Wrong choke setting
Dirty / wrong spark plug
Wrong choke setting
Wrong fuel mixture
Pro Air 100
26 cc / 0.7 kW, 2-stroke
Max 150 km/h
7000 rpm
500 ml
4,5 kg
112 dB(A)
Max 16,1 m/s
Solution
Follow instructions in User
Manual
Adjust choke /
contact service workshop
Clean / replace spark plug
Clean filter
Set choke to "Run"
Clean or change air filter
Adjust choke /
contact service workshop
Adjust choke /
contact service workshop
Clean / replace spark plug
Adjust choke /
contact service workshop
Check mixture ratio
2
Side 17