Cleaning Instructions - Panasonic CS-E9PKEA Bedienungsanleitung

Cleaning instructions

To ensure optimal performance of the unit,
cleaning has to be carried out at regular
intervals. Dirty unit may cause malfunction
and you may see error code "H99". Please
consult authorised dealer.
• Switch off the power supply and unplug before
cleaning.
• Do not touch the aluminium fi n, sharp parts may
cause injury.
• Do not use benzine, thinner or scouring powder.
• Use only soap ( pH 7) or neutral household
detergent.
• Do not use water hotter than 40 °C.
Indoor unit
Wipe the unit gently with a soft,
dry cloth.
Front panel
Wash gently and dry.
Remove the front panel
Pull out
2
1 Raise
Close it securely
Press both ends of
3
the front panel
2
Close down
For CS-E18PKEA:
4
Press at centre of the front panel
Indoor unit
Air fi lters
Every 2 weeks
• Wash/rinse the fi lters gently
with water to avoid damage to
the fi lter surface.
• Dry the fi lters thoroughly under shade, away
from fi re or direct sunlight.
• Replace any damaged fi lters.
Remove air fi lter
For seasonal inspection after extended
non-use
• No obstruction at air inlet and air outlet vents.
• Use Auto OFF/ON button to select COOL/
1 Insert at
both sides
For extended non-use
• Activate HEAT mode for 2~3 hours to remove
• Turn off the power supply and unplug.
Front panel
Air fi lters
HEAT operation. After 15 minutes of
operation, it is normal to have the following
temperature difference between air inlet and
air outlet vents:
COOL: ≥ 8 °C HEAT: ≥ 14 °C
moisture left in the internal parts thoroughly.
Aluminium fi n
Attach air fi lter
Insert into the unit
9