Clock; How To Use - Panasonic CS-E9PKEA Bedienungsanleitung

How to use

POWER TIMER
(Green) (Orange)
FAN SPEED
To select fan speed
Remote control display
(
• For AUTO, the indoor fan speed is automatically
adjusted according to the operation mode.
To adjust vertical airfl ow
AIR SWING
direction
Remote control display
(
• Keeps the room ventilated.
• In COOL/DRY mode, if AUTO is set, the louver
swings up/down automatically.
• In HEAT mode, if AUTO is set, the horizontal
louver is fi xed at the predetermined position.
• Do not adjust the louver by hand.
Auto OFF/ON button
AUTO
OFF/ON
6
)
)
Use when remote control is a malfunction occurs. Raise the front panel:
1. Press the button once to use in AUTO mode.
2. Press and hold the button until you hear 1 beep, then release to use in forced
COOL mode.
3. Repeat step 2. Press and hold the button until you hear 2 beeps, then release to
use in normal COOL mode.
4. Repeat step 3. Press and hold the button until you hear 3 beeps, then release to
use in forced HEAT mode.
• Press the button again to turn off.
These indicators are not used.
Remote control display
OFF / ON
TIMER/CLOCK
MODE UP SELECT
FAN SPEED
OFF/ON DOWN SET
AIR SWING

CLOCK

CANCEL
CHECK
Press and hold
for approximately
10 seconds to show
temperature setting in
°C or °F.
Indicator
MODE
QUIET/
TEMP
POWERFUL
AC RC
RESET
Press to restore the
remote control to
default setting.
Not used in normal
operations.