Machine Description; Technical Data; Environment - Belle Group RPC 45/60 Bedienungshandbuch

5
4
3
2
Model
Engine - Honda GX 270 Petrol (Hp)
Engine - Hatz 1B30Diesel (Hp)
Weight - Honda GX 270 Petrol (Kg)
Weight - Hatz 1B30 Diesel (Kg)
Engine RPM - Honda
Engine RPM - Hatz
Centrifugal Force (kN)
Frequency - Honda (Hz)
Frequency - Hatz (Hz)
Maximum Travel Speed (m/min)
Sound Power (dB(A))
* Minimum level to En500 Part 4
Safe Disposal.
Instructions for the protection of the environment. The
machine contains valuable materials. Take the
discarded apparatus and accessories to the relevant
recycling facilities.
Soil, which has been disturbed or new infi ll, subbase and blacktop, will have small voids or air pockets which, if not compacted, will
lead to one or more problems occurring.
1. As traffi c crosses the surface of an uncompacted area, the material is compressed. This leads to subsidence of the top surface
as the material fi lls the voids.
2. A similar situation occurs with static loads on uncompacted ground. The load (e.g. a building) will sink.
3. Materials with voids are more susceptible to water seepage, leading to erosion. Water ingress may also cause the soil to
expand during freezing temperatures and contract during dry spells. Expansion and contraction is a major cause of damage to
building foundations and normally leads to the structure requiring underpinning.
Compaction increases the density of the material and therefore increases its load bearing capacity. Reduces air voids and therefore
reduces the risk of subsidence, expansion and contraction, due to ingress of water.

Machine Description

7
6
8
450
600

Technical Data

Environment

Reasons For Compaction
1
9
839
45/60
9
6.3
282
290
3600
3000
45
70
70
> 24
107
Component
Handle
Front cover
Main frame
Baseplate
Hand Grips
Engine
Flexible Mounts
Various Parts
5
1. Throttle lever.
2. Recoil Starter Handle.
3. Fuel Tank.
4. Lifting Point.
5. Handle Release Catch.
6. Forward / Reverse Control Handle.
7. Main Handle.
8. Belt Guard.
9. Key Start
Material
Steel
HDPE
Steel
Steel
Polyurethane Foam
Aluminium
Steel and Rubber
Steel and Aluminium
GB
GB
GB
GB