Troubleshooting - RayTek Raynger ST Bedienungsanleitung

English

Troubleshooting

Code
– – – (on display)
Battery icon
appears
Blank display
Laser doesn't work
ERR
CE Certification
This instrument conforms to the following standards:
• EN50081-1:1992, Electromagnetic Emissions
• EN50082-1:1997, Electromagnetic Susceptibility
Tests were conducted using a frequency range of 80-1000 MHz with the instrument in
three orientations. The average error for the three orientations is ±1.4°C (±2.5°F) at 3
v/m throughout the spectrum. However, between 162 MHz and 792 MHz at 3 V/m, the
instrument may not meet its stated accuracy.
14
Problem
Target temperature
is over or under range
Low battery
Possible dead battery
(1) Low or dead battery
(2) Ambient temperature
above 40°C (104°F)
Possible damage
by EMF
Action
Select target within specifications
Check and/or replace battery
Check and/or replace battery
(1) Replace battery
(2) Use in area with lower ambient
temperature
Contact your distributor