iWeld DYNAMIG 560 Bedienungsanleitung Seite 157

No. Material
35 CuSi
36 CuSi
37 CuSi
38 CuSi
39 CuSi
40 CuSi
41 CuSi
42 CuSi
43 CuSi
44 CuSi
45 FLUXBS
46 FLUXBS
47 FLUXBS
48 FLUXBS
49 FLUXBS
50 FLUXBS
51 FLUXRU
52 FLUXRU
53 FLUXRU
Note: the numbers with * mean they are used only for synergistic.
2.6.18 Special Options
Remote Control
The DYNAMIG be matched with a remote control box, and the welding current is set by remote control.
The MIG/MAG welding can be matched with a remote control box (RC 102) which has two knobs and connects
to wire feeder.
Manual mode: a knob is use to adjust the wire feeding speed, and the other one is use to adjust voltage.
Synergic mode: a knob is use to adjust the current, and the other one is use to adjust inductance.
The STICK/MMA welding, arc gouging welding and TIG welding can be matched with a remote control box (RC
101) which has one knob. The remote control box can adjust current.
Wire Protection Gas
0.8 Standard 98%-2% (Ar- CO
0.8 Special 98%-2% (Ar- CO
1.0 Standard 100% (Ar)
1.0 Special 100% (Ar)
1.0 Standard 98%-2% (Ar- CO
1.0 Special 98%-2% (Ar- CO
1.2 Standard 100% (Ar)
1.2 Special 100% (Ar)
1.2 Standard 98%-2% (Ar- CO
1.2 Special 98%-2% (Ar- CO2)
1.0 Standard 82%-18% (Ar-CO
1.0 Special 82%-18% (Ar-CO
1.2 Standard 82%-18% (Ar-CO
1.2 Special 82%-18% (Ar-CO
1.6 Standard 82%-18% (Ar-CO
1.6 Special 82%-18% (Ar-CO
1.0 82%-18% (Ar-CO
1.2 82%-18% (Ar-CO
1.2 82%-18% (Ar-CO
)
2
)
2
)
2
)
2
)
2
)
2
)
2
)
2
)
2
)
2
)
2
)
2
)
2
)
2
29