Mode Led - Beninca ONE.2WI Handbuch

Mode LED

0 Off
Press the button P
1 Red
Press within 3 secs the button P
2 Green
Press within 3 secs the button P
3 Orange
Press within 3 secs the button P
Red
4
Blinking
Press within 3 secs the button P
Green
5
Blinking
Press within 3 secs the button P
0 LED Off
Function
No function
Memorise channel 1
Memorise channel 2
Memorise automatically
channels 1 and 2
Set channel 1 times
Set channel 2 times
No function
TABLE 1
Operations
Normal status.
The red LED will light up, wait 3 secs, the LED will go out and light up
again, press within 5 secs the button on the transmitter to associate with
channel 1.*
The green LED will light up, wait 3 secs, the LED will go out and light up
again, press within 5 secs the button of the transmitter to associate with
channel 2.*
The orange LED will light up, wait 3 secs, t
up again, press within 5 secs any button on the transmitter.
Button 1 will be associated with channel 1, button 2 with channel 2.*
The LED will give 5 rapid blinks. If button P is pressed during these 5
blinks the next mode is entered. After the 5 rapid blinks the Times menu is
entered. See section "Times Mode"
The LED will give 5 rapid blinks. If button P is pressed during these 5
blinks the next mode is entered. After the 5 rapid blinks the Times menu is
entered. See section "Times Mode"
Normal status.
he LED will go out and light
13