Hama 00183326 Bedienungsanleitung Seite 4

Warning – Connecting USB-C
terminal devices
• Ensure that your notebook, tablet PC,
smartphone or console requires a power supply
voltage of 5 / 9 / 12 / 15 volts (+/- 1 V).
• The speci ed supply voltage can be found on
the original power supply unit or in the user
manual of your device.
• Ensure that the total power consumption of the
notebook, tablet PC, smartphone or console
does not exceed the power supply unit's rated
output capacity of 18 W.
Warning
• Only connect the product to a socket that has
been approved for the device. The socket must
be installed close to the product and easily
accessible.
• Disconnect the product from the network using
the power button – if this is not available,
unplug the power cord from the socket.
• When using a multi-socket power strip,
make sure that the sum power draw of all
the connected devices does not exceed its
maximum throughput rating.
• If you will not be using the product for a long
period of time, disconnect it from mains power.
Unless the operating instructions for the devices
you want to charge explicitly inform you otherwise,
proceed as follows:
• Connect your terminal device to the USB charging
socket using a suitable USB cable.
• Connect the charger to a properly installed and
easily accessible power socket.
• Charging progress is displayed on your terminal
device.
• Disconnect the terminal device from the charger if
you want to interrupt charging or if the terminal
device is fully charged.
• Then disconnect the charger from the mains.
When charging batteries built into a device, pay
attention to the maximum charging time for the
batteries.
5. Care and Maintenance
Only use dry, soft cloths for cleaning.
Note
Disconnect the device from the power supply
before cleaning or if it will not be used for a long
period of time.
6. Technical specifications
Charger
Input voltage
USB-C
Max. output voltage/current
Total output power
Ambient temperature
7. Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and
provides no warranty for damage resulting from
improper installation/mounting, improper use of
the product or from failure to observe the operating
instructions and/or safety notes.
100 – 240 V AC ~
Power Delivery:
5V 3A
9V 2A
12V 1.5A
15V 1.2A
QC 2.0/3.0:
3.6 – 6.5V 3A
6.5 – 9V 2A
9 – 12V 1.5A
18 W max.
0°C – 40°C
3