Historical Memory - Makita LD060P Bedienungsanleitung

D
value 1.000 m). This value can be adjusted to the
GB
desired stake out distance.
F
The value is increased.
I
The value is reduced.
E
Holding the button down accelerates the speed at
NL
which the value changes.
1x briefly: starts continuous measurement.
P
N
In intermediate line 1, the set distance or the next
appropriate multiple thereof is displayed.
FIN
In the summary row, the distance to the next appro-
DK
priate stake out point is displayed.
S
When approaching a stakeout point (to less than
0,10 m), the instrument starts to beep. When the
TR
point is reached, the beep sound changes and inter-
CZ
mediate line 1 starts to flash.
SK
1x briefly: distance measurement is interrupted
and the instrument switches back to individual
PL
distance measuring mode.
SLO
HR

Historical memory

H
1x briefly: the
GR
value are displayed.
RUS
Use the "+" or "-" buttons to navigate through the
LV
last 10 values. The values can also be used in
functions.
EST
LT
ROK
CN
Functions
symbol and the last measured
Using stored values in functions
Using added distances in area functions (e.g. wall
surfaces or painters):
Adding distances (see additions / subtractions)
Call up area function to e.g. measure the height
of a room.
1x briefly: calls up the historical memory and to
possibly search for the correct value.
1x briefly: the value is entered into the function
and the result of the function (e.g. area) is
displayed.
Timer (self-triggering)
1x briefly: The
The timer is preset to 5 seconds.
The value is increased.
The value is reduced.
Holding the buttons down increases the rate of
change of the values.
The countdown starts automatically (if the laser is
activated) and then triggers the measurement.
8
symbol is displayed.
Makita LD060P