Functional Characteristics - KikkaBoo Divaina Gebrauchsanweisung

PARTS
1. Handle 2. Canopy bracket 3. Seat button 4. Height adjustment button on seat unit 5. Suspension adjuster 6. Basket 7. Rear wheel
8. Canopy 9. Seat unit 10. Bumper bar 11. Safety belt 12. Footrest adjuster 13. 360˚ rotatable front wheels

FUNCTIONAL CHARACTERISTICS

1. ANGLE ADJUSTABLE SEAT - Seat angle is adjustable by backrest adjuster, which is positioned behind the seat.
2. REVERSIBLE SEAT - Reversible seat make it easy for mother to communicate with her love face to face.
3. QUICK-RELEASE SEAT - Simple and convenient to remove the seat.
4. REMOVABLE FRONT BUMPER - Remove the front bumper by pressing bumper buttons.
5. HEIGHT ADJUSTABLE SEAT - Four-position adjustable seat height, convenient to choose the right height needed.
6. ADJUSTABLE HANDLE - Four-position extension handle make it easy to adjust the handle.
7. ADJUSTABLE FOOT REST - To lower the foot rest, press the buttons on the sides of the foot rest and at the same time press down the foot
rest to the desired position. To lift the foot rest, simply push it upward.
8. ONE HAND PULLING STROLLER - Fold the stroller, lock the front wheel, you can pull the stroller by one hand.
ASSEMBLY
UNFOLDING OF CHASSIS:
1. Release the folding hook.
2. Lift the handle until the complete deployment of the chassis.
3. The frame is unfolded when you hear the "click" sound.
WARNING: To avoid injury ensure that your child is kept away when unfolding and folding this product. The unfolding operations should be
smooth. Should you encounter any resistance during the manipulation, repeat the above prescribed procedures. ensure that all locking
devices are totally engaged before use. An incorrect manipulation could result in irreversible damage to the stroller and withdrawal of
guarantee of the product.
INSTALLATION AND REMOVAL OF WHEELS:
4. Installing: Press the wheel cap in the middle and align the axle of each wheel wit the opening on the chassis and push rmly.
Removing: Press the wheel cap in the middle and pull outward and detach the wheels from the chassis.
WARNING: After having installed the wheels, pull hardly each of them to ensure that they are well blocked in place. Clean and lubricate
regularly the axles of the wheels.
5. Installing: Push each front wheel assembly onto the front wheel post until it locks into place. Pull on the wheel assembly to ensure that it is
securely attached to the stroller.
6.7. Removing: Press inward the metal clip at the end of wheel post and simultaneously detach the wheels from the post.
INSTALLATION AND REMOVAL OF SEAT:
8. Installation: Set the brake, then attach the seat by lining up the seat anchors on the two sides of the seat with the slots on the stroller frame
and push them together until they lock securely. The seat can used in either direction, front or backwards. Verify that the seat is solidly
attached to the chassis by getting hold on the seat and lifting the ensemble.
Removing: Press the buttons on two sides of the seat, take out the seat anchors from the slots to detach the seat.
INSTALLATION AND REMOVAL OF CANOPY:
9. Installation: Fix the two hood clips on two sides of the seat tubes then zip the canopy.
10.11. Removing: Unzip the hood, then pull outward two hood clips on two sides of seat tubes to detach hood.
HANDLE HEIGHT ADJUSTMENT:
12. To adjust the handlebar height, press the button (t) at the top of the handlebar and adjust the handlebars to the desired height.
INSTALLATION AND REMOVAL OF THE BUMPER BAR:
13. Installation: Insert the bumper bar into the slot until it locks in position. After each time of installation, verify that the bar is correct and
rmly xed to the stroller by pulling it toward yourself.
14. Removing: Press buttons presents on each side of seat, and simultaneously pull the bumper bar towards yourself to detach bumper.
USE
A1.A2. Unfold the chassis: Unlock the folding hook. Lift up the handle until you hear the "click"sound.
B. Adjusting handle: Press the button to adjust the handle to suiatable position.
C. Adjusting the seat height: Pull up the seat height adjuster to adjust to suitable position.
D. Unfolding the hood: Push forward to un od the hood.
E. Using the brake: To engage the brake, step on the brake pedal which is close to the right rear wheel. To disengage the brake, ligt the pedal
with your foot. WARNING: Verify the e ciency of the brake each time after having engaged it, by pushing the stroller backward and forward.
USING OF THE BUCKLE AND THE HARNESS :
This seat unit is intended for children from 6 to 36 months.
Place the crotch strap between your child's legs and the shoulder straps over your child's shoulders. Fasten the harness by, rstly, attaching the
seat belts to the shoulder straps (photo F) and secondly, inserting the ensembles to the central buckle (photo G). Adjust the size of the harness
with the aid of the adjustment buckles on the straps (photo H). To unfasten the harness, press the central button (photo I).
ENGLISH