Frame Preparation - Cervelo S3 Montagehandbuch

FRAME PREPARATION

1. Apply carbon paste to both frame and
seatpost.
2. Insert Seatpost Clamp (SPC-0E0S2S3) fully
into frame so it is fully flush with the top tube.
3. Adjust height and torque to 8 Nm maximum.
Hold the frame using a
secured seatpost only.
Apply Loctite 242 to the fixing screws, and
tighten the screws equally to a maximum
of 1 Nm.
Clamping the top tube can damage
the frame and void your warranty.
With the rear wheel
installed in the frame, use
a Derailleur Alignment
Gauge to ensure the
hanger is aligned parallel
to the wheel.
8