Lightmaxx StarSphere Six 6x3W RGBAWP Bedienungsanleitung Seite 3

LED function setting panel
Wireless Remote (IR)
Set the DMX address using the remote
controller: press "DMX" button, then
press number buttons to set the DMX
address. For example, to set the address
as 8, you should press "DMX" button,
then press " 0 " , " 0 " , " 8 " . Press
"SAVE" to save the settings. If the input
value is more than 511, the DMX address
will reset to 1.
Functions
Mode Function
A1
A2
A3
Automatic
A4
Play
A5
A6
A7
S1
Sound
Activated
S2
A001 DMX
SLAV Slave mode
USER MANUAL
Front panel
Motor speed
Red/Red&Yellow/Red&Pink always ON, motor speed from slow to fast
Green/Red&Green/Green&Yellow always ON, motor speed from slow to fast
1-9
0-9
Sound activating color change and strobe. If no sound, run automatically.
001-511
DMX linking jack
Sound active mode
S1/S2
Auto programs
A1/A7
Auto programs
A7/A1
DMX mode
Set DMX address
Blue/Blue&White always ON, motor speed from slow to fast
Each 3 colors random running, motor speed from slow to fast
7 colors random transformation, motor speed from slow to fast
Gradually change mode, no strobe
Sound activating color change and strobe
With DMX signal input, the right corner of "A" will flash.
With signal input, the right corner of "S" will flash.
Rear panel
Fuse
Slave mode
Effect
Strobe mode
Power cable
Power ON/OFF
Motor speed
1~9
Motor speed
9~1
Save DMX
settings