Inhaltsverzeichnis
Werbung
2-5-1. Removing the lens
Preparation:
[1] Return to the center position. (page 78)
[2] Turn off the main power and unplug the power cable.
[3] Wait for the projector to cool sufficiently before removing the lens, before removing the front cover. (page 26)
1
Rotate the lens counterclockwise while holding down the RELEASE LEVER.
The lens unit can be removed from the projector.
RELEASE LEVER
2
Slowly remove the lens from the projector by pulling it straight out.
After removing the lens, attach the lens cap to both the front and back of the lens for proper storage. If the projector is
stored without the lens, attach the dust cover to the lens hood.
3
Mount the front cover to the projector.
This completes the remove of the lens.
Setting Up Your Projector
43
Werbung
Inhaltsverzeichnis
