Review Screen; Appendix A: The Low Threshold Setting - Toro Precision Soil Sensor Bedienungsanleitung

Review Screen

The Review screen allows operators to review settings for the
various sensors added to the controller.
1. Press the Review button.
to the SOIL SENSOR. Press
2. Press
REVIEW
SCHEDULE A
SCHEDULE B
AUX 2
RAIN SENSOR
SOIL SENSOR
3. Use to scroll through the various sensor settings.
REVIEW
SOIL SENSOR
ADJUST
RAIN STATUS
SENSOR TEMP
SIGNAL STRENGTH

Appendix A: The Low Threshold Setting

Landscape plants are the heartiest when their roots become established several
inches down where water is stored for the longest period of time. Watering
often, for short periods of time, promotes root growth near the top of the
soil, where the moisture evaporates quickly.
.
---
The key to maintaining healthy plants with minimum water waste is to water
WET
thoroughly–only when it's needed. The Precision™ Soil Sensor is preset to
81 ° F
restrict watering until the soil moisture level drops to 50% of capacity, or 1/2
of the total moisture that can be retained in the soil. If you were to draw a
comparison to a car's fuel tank, 50% of the soil moisture capacity would be
similar to using 1/2 of the fuel in the tank before stopping to refill. A 50%
setting restricts the sprinklers from refilling the soil to capacity until 1/2 of
the moisture has been lost; causing the roots to go deeper for water. With the
capability to adjust the setting incrementally from 0% to 100%, the Precision
Soil Sensor can be fine-tuned for virtually any soil condition.
Waste
100% Capacity
Optimum
50%
Stress
Permanent Wilt
0%
11