Menu Settings; Moisture Now; Low Threshold - Toro Precision Soil Sensor Bedienungsanleitung

3. Press to select the desired soil sensor.
SENSORS
A
RAIN -
WEATHER -
SOIL 1
SOIL 2 -
4. To add a sensor to a schedule:
Press or to select the desired Schedule (A, B, or C).
Press or to make the sensor active for the
selected schedule.
: Sensor is active.
-
: Sensor is disabled.
In the screen above, a rain sensor is assigned to schedule B
and a soil sensor to schedule A.
8
B C
-
- -
- -
- -
5. Press until the Soil Sensor menu appears.
SOIL 1 SENSOR

MOISTURE NOW

LOW THRESHOLD

LOW THRESHOLD
SIGNAL STRENGTH
BATTERY LEVEL
CALIBRATE

Menu Settings

MOISTURE NOW
This displays the current moisture level, as a percentage, of the
soil. 100% is the soil level set after the first calibration
(see Calibrate the Sensor, page 6).
LOW THRESHOLD
This is the point at which the soil sensor will let the controller
resume irrigation of the landscape. If you were to compare the
soil to a gas tank, the "low threshold" would be the point at
which you refill the gas tank.
For a detailed explanation of the low threshold setting,
please read Appendix A of this manual.
100%
50%
GOOD
START