Review; Resetting To Factory Defaults; Smart Connect; Wireless Communication Problems - Toro EVO-WS Handbuch

Review Screen
The Review screen allows operators to review settings
for the various sensors added to the controller.
1. Press the Review button.
to the WEATHER SENSOR. Press
2. Press

REVIEW

SCHEDULE A
SCHEDULE B
AUX 2
RAIN SENSOR
WEATHER SENSOR
3. Use to scroll through the various sensor settings.
REVIEW
WEATHER SENSOR
ADJUST
RAIN STATUS
SENSOR TEMP
SIGNAL STRENGTH

Resetting to Factory Defaults

!
1. Go to the Sensors screen (page 10) and scroll down to
SMART CONNECT. Press
.
2. Change the value to YES and press

Wireless Communication Problems

The effective range of the EVO-WS Weather Sensor is 1,000 feet. That
---
range can be impacted by walls and/or electrical appliances that cause
WET
radio interference.
81 ° F
If you experience wireless communication problems, try the following:
• Install the sensor as close to the controller location as possible. If
the signal strength is not good in one location, try another location
nearby. Sometimes moving the sensor only a few feet can greatly
improve signal strength.
Resetting to Factory Defaults clears ALL SENSOR
SETTINGS and ALL ADDED IDs.
SENSORS
A
SOIL 1 -
SOIL 2
SOIL 3

SMART CONNECT

.
B C
-
.
13