Toro EVO-WS Handbuch Seite 8

2. (A) For rain gutter installation: back the bracket
thumbscrew out to clear the rain gutter edge. Holding
the Weather Sensor in position, tighten the thumbscrew
securely.
(B) For solid structure installation: remove the thumbscrew
and secure the bracket using the provided stainless screws
(or other appropriate stainless fasteners).
3. With the mounting bracket securely fastened, check the
vertical alignment of the Weather Sensor. To adjust, loosen
the phillips screw at the bracket joint, adjust to vertical, then
tighten the screw securely.
8
A
B