Installing the WLAN AP 8120-O on a vertical pole
About this task
Complete the following procedure to mount the WLAN AP 8120-O on a vertical pole.
Procedure
1. Place the lock and flat washers on the four hex cap screws.
Avaya WLAN 8100 Regulatory Information — WLAN AP 8120-O
Table 5: EIA/TIA wiring
EIA/TIA 568-A WIRING
PIN 1– Green and white
PIN 2– Solid green
PIN 3– Orange and white
PIN 4– Solid blue
PIN 5– Blue and white
PIN 6– Solid orange
PIN 7– Brown and white
PIN 8– Solid brown
Installing the WLAN AP 8120-O
EIA/TIA 568-B WIRING
PIN 1– Orange and white
PIN 2– Solid orange
PIN 3– Green and white
PIN 4– Solid blue
PIN 5— Blue and white
PIN 6– Solid green
PIN 7– Brown and white
PIN 8– Solid brown
February 2012
25