Team Orion ORI30155 Advantage IQ605 Anleitung Seite 16

 Power supply control
This function will stop any charging procedure if the power supply voltage drops below a certain
threshold.
Input Power Low
Cut-Off 10.0V
 Charge settings memory
The charger is equipped with a memory that can store settings for five different batteries.To modify
the memorized settings, use the STOP or - keys to select the save data screen and then press the
START key.
PROGRAM SELECT
SAVE DATA
SAVE 01 LiPo
3.7V 5000mAh
The memory slot number blinks, use the - or + keys to select the memory slot you wish to modify, then
press START. Use the START key to select the different settings and the - or + keys to modify them.
SAVE 01 LiPo
3.7V 5000mAh
Once you have made the changes, press and hold the START key for three seconds. The screen will
now display the various charge and discharge settings for the selected battery type. Please refer to
the previous setup instructions for more information.
Once you have made all the changes, press and hold the START key for three seconds to save
the changes to the actual memory slot.
16 Team Orion Advantage IQ605