Panasonic CF-VEBD11 Series Benutzerinformationen Seite 4

Precautions
●
If a Malfunction or Trouble Occurs, Immedi-
ately Stop Use
If a Malfunction Occurs, Immediately Unplug
the AC Plug and Remove the Unit From This
Product
• This product is damaged
• A foreign object is inside this product
• Smoke is emitted
• An unusual smell is emitted
• Unusually hot
Continuing to use this product while any of the
above conditions are present may result in fire or
electric shock.
• If a malfunction or trouble occurs, immediately
unplug the AC plug and remove the unit from
this product. Then, contact your technical sup-
port office for repair.
●
Do Not Touch This Product and Cable When It
Starts Thundering
Electric shock may result.
●
Do Not Place Containers of Liquid or Metal
Objects on Top of This Product
If water or other liquid spills, or if paper clips,
coins, or foreign matter get inside this product, fire
or electric shock may result.
• If foreign matter has found its way inside, im-
mediately unplug the AC plug and remove this
product from the unit. Then contact your techni-
cal support office.
●
Do Not Place This Product on Unstable Sur-
faces
If balance is lost, this product may fall over or drop,
resulting in an injury.
●
Do Not Keep This Product Wherever There
is a Lot of Water, Moisture, Steam, Dust, Oily
Vapors, etc.
Otherwise, possibly resulting in fire or electric
shock.
●
Do Not Leave This Product in High Tempera-
ture Environment for a Long Period of Time
Leaving this product where it will be exposed to
extremely high temperatures such as near fire or
in direct sunlight may deform the cabinet and/or
cause trouble in the internal parts. Continued use
in such a resulting condition may lead to short-
circuiting or insulation defects, etc. which may in
turn lead to a fire or electric shocks.
●
Use Only the Specified AC Adaptor With This
Product
Using an AC adaptor other than the one supplied
(supplied with the unit or one sold separately as
an accessory) may result in a fire.
4
●
Do Not Connect a Telephone Line, or a Net-
work Cable Other Than the One Specified,
Into the LAN Port
If the LAN port is connected to a network such as
the ones listed below, a fire or electric shock may
result.
• Networks other than 1000BASE-T, 100BASE-
TX or 10BASE-T
• Phone lines (IP phone (Internet Protocol Tele-
phone), Telephone lines, internal phone lines
(onpremise switches), digital public phones,
etc.)
●
Do Not Turn the Volume Up Too Loud When
Using Headphones
Listening at high volumes that overstimulate the
ear for long periods of time may result in loss of
hearing.
<Only for model with CD/DVD Drive>
●
Do Not Look Into the CD/DVD Drive
Looking directly at the internal laser light source
may result in damage to eyesight.
<Only for model with CD/DVD Drive>
●
Do Not Use Discs That Are Cracked or De-
formed
Because the discs rotate at high speeds, dam-
aged discs may break apart causing injury.
• Discs that are not round and discs that have
been repaired using adhesives are similarly
dangerous, and so should not be used.
●
Using this product continuously in a hot en-
vironment will shorten the product life. Avoid
use in these types of environments.
●
When using in hot or cold environment, some
peripherals may fail to work properly. Check
the operation environment of the peripherals.
<Only for model with CD/DVD Drive>

Drive Handling Care
●
Do not expose the drive to excessive smoke that
may leave a residue, e.g., oil smoke, or tobacco
smoke. Doing so can shorten the life of the drive
lens.
●
We recommend cleaning the drive lens with an
air puffer used for camera lenses.
(Do not use any spray-type of lens cleaning prod-
ucts.)
When opening/closing the tray
●
When the computer is on, use the eject button or
eject through Windows.
●
When inserting or removing a disc, be careful
not to touch the lens and other parts of the laser
pickup.