Troubleshooting; Cleaning - Silvercrest SKS 4 A1 Bedienungsanleitung Und Sicherheitshinweise

Troubleshooting

Fault
The appliance is not
working.
The alarm does not
start or the light
or sound does not
work.
If the above suggestions do not resolve the problem, or if you experience any other type of
problem, please contact Customer Service.

Cleaning

DANGER
Risk of fatal injury from electrocution!
► Unplug the mains adapter
CAUTION
► To avoid irreparable damage to the appliance, ensure that no moisture can
penetrate the appliance during cleaning.
► Do not use caustic, abrasive or solvent-based cleaning materials. These can
irreparably damage the surfaces of the appliance.
♦ Clean the surfaces of the appliance and the motif discs
dry cloth.
♦ Use a lightly moistened cloth and a mild detergent to remove stubborn dirt
residues. Wipe with a cloth moistened only with water to remove detergent
residue. Dry all parts well.
■ 82 │ GB │ MT
Possible cause
The appliance is not con-
nected to the mains.
No batteries in the battery
compartment or the
batteries are dead.
The batteries are inserted
incorrectly in battery com-
partment .
The appliance is not con-
nected to the mains.
The main switch is in the
position .
Remedy
Make sure that the mains adapter
is connected to the connection socket
and to a mains socket.
Check that the batteries have sufficient
charge and replace them if necessary.
Check that the batteries are properly
inserted in the battery compartment
. Place the batteries into the battery
compartment
the polarity diagram.
Make sure that the mains adapter
is connected to the connection socket
and to a mains socket.
Make sure that the main switch
is in the (light + sound) or (light
only) position.
from the wall socket before cleaning.
as indicated on
with a soft,
SKS 4 A1