Basler BIP-640c-dn Installationsanweisung Seite 11

Pin Function Description
5 RS-232 RS-232 transmit.
Transmit
Note: RS-232 transmit on the camera should be connected to
RS-232 receive on your device.
6 RS-232 RS-232 receive.
Receive
Note: RS-232 receive on the camera should be connected to
RS-232 transmit on your device.
Table 2: Camera Pinout
We recommend that connections to the input and the output be made with
shielded cable and that the cable shields be connected to ground. If you are
unable to connect the cable shields to ground or if you use unshielded cable,
we recommend that you install a ferrite bead on each cable near to the camera
to minimize electromagnetic interference.
Basler IP Camera
Installation Guide
9