D-Link DSL-502T Schnellinstallationsanleitung Seite 6

Configuring the Router (continued)
In the Connection 1 menu, type the Username and Password used to verify the identity of
your ISP account. It may be necessary to change the PPP encapsulation Type used for your
connection. You may also need to change the VPI or VCI value. Your ISP will give these
settings to you if they need to be changed. Click the Apply button when you have entered all
the information. To save the changes made to Connection 1, click the Tools tab and follow the
instructions on the next page.
A. Type the Username
and Password used for
your account.
C. Click the Apply
after you have entered the
account information.
button
D. Click Tools when
you have applied the
new settings.
6
B. Check the PPP
encapsulation Type,
VPI: and VCI: - if these
values are not correct,
change these according
to the instructions of
your ISP.