One-Hour Off Timer; Timer Operation - Sharp AY-XPC7JHR Bedienungsanleitung

ONE-HOUR OFF TIMER

When the ONE-HOUR OFF TIMER is set, the unit
will automatically turn off after one hour.
1
Press the ONE-HOUR OFF TIMER
button.
• The remote control displays "
• The orange TIMER lamp (
light up.
• The unit will stop operating after one hour.
TO CANCEL
Press the TIMER CANCEL (SET/C) button.
• The orange TIMER lamp (
turn off.
Alternatively, turn the unit off by pressing the
ON/OFF button.
• The red OPERATION lamp (
orange TIMER lamp (
NOTE:
• The ONE-HOUR OFF TIMER operation has
p r i o r i t y o v e r T I M E R O N a n d T I M E R O F F
operations.
• If the ONE-HOUR OFF TIMER is set while the
unit is not operating, the unit will operate for an
hour at the formerly set condition.
• If you wish to operate the unit for another hour
before the ONE-HOUR OFF TIMER is activated,
press the ONE-HOUR OFF TIMER button again
during operation.
• If TIMER ON and/or TIMER OFF are set, TIMER
CANCEL button cancels every setting.
".
) on the unit will
1
CANCEL
) on the unit will
) and the
) on the unit will turn off.
GB-10

TIMER OPERATION

TIMER OFF
1
Press the TIMER OFF (
2
The TIMER OFF indicator will blink;
press the TIME ADVANCE or REVERSE
button to set the desired time.
(The time can be set in 10-minute increments.)
3
Point the remote control at the receiver
window on the unit and press the TIMER
SET (SET/C) button.
• The orange TIMER lamp (
light.
• The unit will generate a beep when it receives
the signal.
TIPS ABOUT TIMER OFF OPERATION
When the TIMER OFF mode is set, the temperature
setting is automatically adjusted to prevent the room
from be coming excessively hot or too cold while you
sleep. (Auto Sleep function)
COOL/DRY MODE:
• One hour after the time operation begins, the
temperature setting rises 1°C higher than the
original temperature setting.
HEAT MODE:
• One hour after the timer operation begins, the
temperature setting drops 3°C lower than the
original temperature setting.
) button.
) on the unit will
1
2
3