Operation; On-Screen Display (Osd) - Stryker WiSe 19" HDTV Handbuch

Operation

Operate the display using the rotary control located on the front panel. A list of
the display controls and their functions is provided below.

On-Screen Display (OSD)

Accessing the On-Screen Display
To access the OSD, use the Rotary Control as outlined below:
• Turn Right/Left — With the on-screen display menu activated, turning
increases/decreases the value of the selected parameter. With the on-screen
display deactivated, turning activates the video source selection menu.
• Push — Accesses/selects on-screen display menu.
• Push and Hold — Exits on-screen display menu.
Operating On-Screen Display
Th e device OSD helps navigate through various device menus.
1. Press the Rotary Control to activate the OSD menu.
2. Rotate the Rotary Control to move up or down through the menu.
Th e parameter will be highlighted when selected.
3. Press the Rotary Control to enter the next level OSD.
4. Rotate the Rotary Control to increase or decrease the value of the selected
parameter, or to make a selection on diff erent options.
5. To exit the OSD menu screen from the second — or third — level OSD
menu, select the Exit option. To completely exit the OSD, press and hold
the Rotary Control. If no keys are pressed, the OSD will automatically exit
aft er the factory-set predetermined time (the time is customizable).
6. While the OSD menu is deactivated, rotate the Rotary Control to activate
the input signal selection menu. Th e current input signal will be indicated
by a dot. Rotate the Rotary Control to select the preferred input signal.
Input Selection List
• Digital RGB
• Analog RGB
• S-Video
• Component (Y/Pb/Pr)
• HD/SD-SDI
• SOG
• RGBS
• C-Video
• Wireless RGB
• Exit
13