Integrated Distance Meter; Electromagnetic Compatibility Emc - GeoMax Zoom3D Gebrauchsanweisung

1.6.2

Integrated Distance Meter

Integrated Distance
Meter
CAUTION
Labelling
1.7

Electromagnetic Compatibility EMC

Description
WARNING
CAUTION
Safety Directions
The GeoMax Zoom3D produces a visible laser beam which emerges from the front of the instrument.
The laser product described in this section is classified as laser class 2 in accordance with:
• IEC 60825-1 (2014-05): "Safety of laser products"
These products are safe for momentary exposures but can be hazardous for deliberate staring into the
beam. The beam may cause dazzle, flash-blindness and after-images, particularly under low ambient light
conditions.
Description
Wavelength
Maximum average radiant power
Pulse repetition frequency
Pulse duration
Beam divergence
From a safety perspective, class 2 laser products are not inherently safe for the eyes.
Precautions:
1) Avoid staring into the beam or viewing it through optical instruments.
2) Avoid pointing the beam at other people or at animals.
a
011235_001
a) Laser beam
The term Electromagnetic Compatibility is taken to mean the capability of the product to function smoothly
in an environment where electromagnetic radiation and electrostatic discharges are present, and without
causing electromagnetic disturbances to other equipment.
Electromagnetic radiation can cause disturbances in other equipment.
Although the product meets the strict regulations and standards which are in force in this respect, GeoMax
cannot completely exclude the possibility that other equipment may be disturbed.
The product is a class A product when operated with the internal batteries. In a domestic environment this
product may cause radio interference in which case the user may be required to take adequate measures.
There is a risk that disturbances may be caused in other equipment if the product is used with accessories
from other manufacturers, for example field computers, personal computers or other electronic equip-
ment, non-standard cables or external batteries.
Precautions:
Use only the equipment and accessories recommended by GeoMax. When combined with the product, they
meet the strict requirements stipulated by the guidelines and standards. When using computers or other
electronic equipment, pay attention to the information about electromagnetic compatibility provided by
the manufacturer.
Value
620 nm - 690 nm
<1 mW
320 MHz
<1 ns
0.16 mrad x 0.6 mrad
Complies with 21 CFR 1040.10 and
1040.11 except for deviations
pursuant to Laser Notice Nr.50,
dated June 24, 2007
IEC 60285-1:2014
λ=620-690nm
Pav<1mW
tp<1ns
Laser Radiation
Do not stare into the beam
Class 2 Laser Product
according to IEC 60825-1
(2014 - 05)
Po  1.00 mW
 = 620 - 690 nm
Zoom3D | 7
en