GeoMax Zoom3D Gebrauchsanweisung Seite 3

Introduction
Purchase
Product Identification
Trademarks
Available
Documentation
Introduction
Congratulations on the purchase of the Zoom3D.
This manual contains important safety directions as well as instructions for setting up the product and
operating it. Refer to "1 Safety Directions" for further information.
Read carefully through the User Manual before you switch on the product.
The type and serial number of your product are indicated on the type plate.
Always refer to this information when you need to contact your agency or GeoMax authorised service work-
shop.
• Windows is a registered trademark of Microsoft Corporation in the United States and other countries
All other trademarks are the property of their respective owners.
Name Description/Format
Zoom3D Quick Intended as quick reference guide for software installation and first
Start setup.
Zoom3D User All instructions required in order to operate the product to a basic level
Manual are contained in the User Manual. Provides an overview of the product
together with technical data and safety directions.
Safety Manual Provides important safety instructions for the use of the Zoom3D.
Refer to the following resources for all Zoom3D documentation/software:
• the GeoMax USB stick
 
-

en
 
Zoom3D | 2