Display Symbols - CefarCompex CEFAR PERISTIM PRO Gebrauchsanweisung

4. OVERVIEW/DISPLAY SYMBOLS
1. BROKEN CIRCUIT
Broken circuit. The reason for a broken circuit may be too high resistance or cable breakage. See chapter 10.
2. PAUSE
Paused program.
3. KEY LOCK
Activated key lock. The key lock is automatically activated if no key is pressed for 10 seconds.
Deactivate the key lock by pressing the left or right DECREASE button.
4. PROGRAM LOCK
Activated program lock.
5. BATTERY STATUS
Empty batteries. This symbol is shown when the batteries are almost empty.
6. PROGRAM NUMBER
Selected program number.
7. REMAINING TIME
Remaining program time in minutes and seconds. Time is flashing during timer setting.
8. AMPLITUDE BARGRAPH (left and right channel)
Selected amplitude as a bargraph.
9. AMPLITUDE LEVEL (left and right channel)
Selected amplitude in mA.
10.STIMULATION/REST
Stimulation/rest indication for programs with intermittent stimulation. The upper part of the symbol is
flashing during stimulation and the bottom part during rest time.
1 2 3
6
8 9 10
4
5 1
7
9 8
11