Ecom Tab-Ex 02 DZ2 Bedienungsanleitung Seite 20

4
After fully charging, disconnect the charger from the device. Then, unplug
the charger from the electric socket.
Do not remove the battery before removing the charger.
This may damage the device.
Reducing the battery consumption
Your device provides various options that help you conserve battery power.
• Optimise the device using the device maintenance feature.
• When you are not using the device, turn off the screen by pressing the
Power key.
• Activate power saving mode.
• Close unnecessary apps.
• Deactivate the Bluetooth feature when not in use.
• Deactivate the Wi-Fi feature when not in use.
• Deactivate auto-syncing of apps that need to be synced, such as emails.
• Decrease the backlight time.
• Decrease the screen brightness.
Battery charging tips and precautions
• When the battery power is low, the battery icon appears empty.
• If the battery is completely discharged, the device cannot be turned on
immediately when the charger is connected. Allow a depleted battery to
charge for a few minutes before turning on the device.
• If you use multiple apps at once, network apps, or apps that need a
connection to another device, the battery will drain quickly. To avoid losing
power during a data transfer, always use these apps after fully charging the
battery.
• Using a power source other than the charger, such as a computer, may
result in a slower charging speed due to a lower electric current.
• The device can be used while it is charging, but it may take longer to fully
charge the battery.
• If the device receives an unstable power supply while charging, the touch-
screen may not function. If this happens, unplug the charger from the
device.
20